Easy paper model airplanes using printer paper!

Paper airplanes are exciting and beloved throughout ages by small kids because of their affordability, easy to make, Cheapest in cost – you will only need a sheet of paper. You can make wide range of designs and models right from easy to complex designs from origami. Most of the paper model airplanes may not cover great distances but this paper plane is never down to the performance. Also, we have our How to make a boomerang plane tutorial if you wanna make one for your children. Now, Let’s make the Easy papercraft airplane using printer paper!

Two minutes for Noodles! isn’t it? Three minutes for Paper planes! It’s that simple with liftndrift*

Supplies Required:

  • A4 Sheet of Paper or a Foolscap Paper with 70-90 GSM
  • Ruler or Flat thick object to flatten the folded edges to make a strong crease.

Step 1:

  • Keep the A4 sheet of paper in portrait orientation and fold them from left to right equally as shown in Fig.1
  • UNFOLD them once done.
paper model airplanes

Step 2:

  • Bring the top right side edge to the left side and match it as shown in the Fig.2
papercraft airplane

Step 3:

  • Now, its the time for the top left sided edge, Bring the top left side edge to the right side triangle end and fold it
  • If you have any doubts, Kindly Check the Fig.3
papercraft plane

Step 4:

  • Fold-down the nose of the Paper airplane to the bottom of the triangle along the dotted line as the center.
paper plane model

Step 5:

  • Its time for folding the paper airplane into half, Valley fold it from the left to right equally and check for their symmetry.
paper airplane model

Step 6:

  • Fold the wings down on both sides of about 1 inch from the bottom.
  • Check the Fig.6 for your doubts.

Step 7:

  • Winglets are great control surfaces for stabilizing your aircraft
  • Fold the wing’s edge on both sides of about half-inch to the upside to make winglets
  • Compare fig.7 and fig.8 for your doubts and instructions

Step 8:

  • This Paper model airplanes is a believer of their wings, they have had good performances in sturdy air sometimes.
  • Try them out in your garden, They are all yours now for flying!
paper model airplanes step by step

Paper model airplanes flying technique:

  • Hold the Plane behind the centre of the plane’s gravity centre
  • Keep your left foot slightly forward and launch it in 30 – 40 degrees angle, throw it steadily with a medium force. If it fails, tweak the tail wing slightly up and try again.
  • Try different angles and forces now! Wow, That’s how one learns properly with more trying and flying. Kudos!
  • For More Techniques – Go to Flight Science – Science behind paper airplanes > Flying Techniques. You will find far more than any other tricks available on the internet for How to fly Paper airplanes!

Please leave your Feedbacks / Replies / Queries in the comment section. Good day!

© LND 2020. All contents on this page are illustrated and instructed by liftndrift.com. Except for the permitted contents by the copyright law applicable to you, you may not use or communicate any of the content on this website, including files downloadable from this site, without the permission of theliftndrift@gmail.com

Paper airplane